Fairview, Tillamook County, OR Elevation & Topographic Map

Elevation
82 ft 25 m69 ft 21 m63 ft 19 m50 ft 15 m38 ft 12 m31 ft 10 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Fairview, Tillamook County sits at about 62 ft (19 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
62 ft 19 m
most residents: 51–76 ft
Lowest
32 ft 10 m
on the west side
Highest
82 ft 25 m
on the east edge, below higher ground just outside
Average
57 ft 17 m
all land inside the CDP boundary
Fairview, Tillamook County spans about 50 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 62 ft19 m |
| Highest point Inside the CDP boundary, on the east edge, below higher ground just outside | 82 ft25 m |
| Lowest point Inside the CDP boundary, on the west side | 32 ft10 m |
| Town center USGS map point for Fairview, Tillamook County | 79 ft24 m |
| Airport (TMK) FAA airport elevation, the highest point of its runways, 2.5 mi southwest of the CDP boundary | 39 ft12 m |
| Average of all land | 57 ft17 m |
| Nearest peak Edwards Butte, 6.6 mi southeast of the CDP boundary | 3,160 ft965 m |
Elevation profile, south to north
0.6 mi south to north through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Tillamook County, Oregon, United States
- Population
- 498 2020 Census
- Land area
- 0.5 sq mi
- Density
- 1,104 per sq mi
- Coordinates
- 45.4576° N, 123.7890° W
- Time zone
- Pacific UTC−8 / −7
- Landform region
- Pacific Border
- Drains to
- Pacific Ocean
- Airport
- Tillamook (TMK) 39 ft
- ZIP codes 1
- 97141
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Oceanside220 ft
- Barnesdale190 ft
- Pleasant Valley150 ft
- Netarts97 ft
- Beaver93 ft
- Bay City78 ft
- Fairview, Tillamook County62 ft
- Garibaldi48 ft
- Idaville40 ft
- Tillamook28 ft
- Cape Meares22 ft
Rankings by typical elevation
- Towns in Oregon400th highest of 425
- Towns in Tillamook County13th highest of 21
Peaks and hills nearest, by height
- Trask Mountain3,426 ft
- South Point3,170 ft
- Edwards Butte3,160 ft
- Captain Gray Mountain1,690 ft
- Buzzard Butte1,680 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Fairview, Tillamook County is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.