Clackamas County, OR Elevation & Topographic Map

Topographic elevation map of Clackamas County, Oregon, shaded from 7 ft on the northwest side to 11,250 ft on Mount Hood
Elevation
11,250 ft 3,430 m8,440 ft 2,570 m7,030 ft 2,145 m4,220 ft 1,285 m1,410 ft 430 m7 ft 2 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Clackamas County averages about 2,150 ft (655 m) above sea level across all its land. Its ground runs from 7 ft on the northwest side to 11,250 ft on Mount Hood.

Average elevation
2,150 ft 655 m
all land inside the county
Highest
11,250 ft 3,429 m
on Mount Hood
Lowest
7 ft 2 m
on the northwest side

Clackamas County spans about 11,243 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land2,150 ft655 m
Highest point
Inside the county, on Mount Hood (NGS survey height)
11,250 ft3,429 m
Lowest point
Inside the county, on the northwest side
7 ft2 m

Elevation profile, west to east

46 mi west to east through Lake Oswego.

Topographic Map

Topographic elevation map of Clackamas County, Oregon, shaded from 7 ft on the northwest side to 11,250 ft on Mount Hood
County boundary (dashed) over shaded terrain, with contours every 500 ft (152 m).
Location
County in Oregon, United States
Population
425,857 2024 est.
Land area
1,870.7 sq mi + 12.3 sq mi water
Density
228 per sq mi
Time zone
Pacific UTC−8 / −7
Landform regions
Cascade-sierra Mountains 78%, Pacific Border 22%
Drains to
Pacific Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 27 towns in Clackamas County by typical elevation
  1. Government Camp3,930 ft
  2. Rhododendron1,630 ft
  3. Mount Hood Villages1,260 ft
  4. Sandy950 ft
  5. Boring550 ft
  6. Damascus540 ft
  7. Beavercreek540 ft
  8. Estacada530 ft
  9. Happy Valley510 ft
  10. Mulino440 ft
  11. Oregon City440 ft
  12. West Linn420 ft
  13. Molalla360 ft
  14. Stafford340 ft
  15. Lake Oswego280 ft
  16. Portland partly210 ft
  17. Wilsonville190 ft
  18. Tualatin partly190 ft
  19. Oak Grove180 ft
  20. Canby160 ft
  21. Milwaukie150 ft
  22. Oatfield150 ft
  23. Rivergrove130 ft
  24. Johnson City120 ft
  25. Jennings Lodge110 ft
  26. Barlow100 ft
  27. Gladstone100 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 2 arc-second (≈200 ft, 62 m) grid, coarsened from 1 arc-second so the whole area fits one run. Land means the boundary minus Census area water (on this grid, water areas of at least half a cell).
  • Highest and lowest: the highest land cell, re-read at 1 arc-second around the 25 highest grid cells; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell, re-read at 1 arc-second around the 25 lowest grid cells; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.