Beckham County, OK Elevation & Topographic Map
Elevation
2,310 ft 705 m2,140 ft 650 m2,050 ft 625 m1,880 ft 575 m1,710 ft 520 m1,620 ft 495 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Beckham County averages about 1,950 ft (595 m) above sea level across all its land. Its ground runs from 1,620 ft on the southeast side to 2,310 ft on the northeast side.
Average elevation
1,950 ft 595 m
all land inside the county
Highest
2,310 ft 705 m
on the northeast side
Lowest
1,620 ft 495 m
on the southeast side
Beckham County spans about 690 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,950 ft595 m |
| Highest point Inside the county, on the northeast side | 2,310 ft705 m |
| Lowest point Inside the county, on the southeast side | 1,620 ft495 m |
Elevation profile, south to north
27 mi south to north through Elk City.
Topographic Map
- Location
- County in Oklahoma, United States
- Population
- 22,248 2024 est.
- Land area
- 901.7 sq mi + 2.1 sq mi water
- Density
- 25 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Wheeler County, TX2,450 ft
- Roger Mills County2,150 ft
- Collingsworth County, TX2,130 ft
- Beckham County1,950 ft
- Custer County1,720 ft
- Harmon County1,690 ft
- Greer County1,650 ft
- Washita County1,630 ft
- Kiowa County1,500 ft
Rankings by average elevation
- Counties in Oklahoma7th highest of 77
- Counties in the United States633rd highest of 3,151
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.