Wyandot County, OH Elevation & Topographic Map

Topographic elevation map of Wyandot County, Ohio, shaded from 710 ft on the north side to 980 ft on the north side
Elevation
980 ft 300 m910 ft 280 m880 ft 270 m810 ft 245 m740 ft 225 m710 ft 215 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Wyandot County averages about 860 ft (265 m) above sea level across all its land. Its ground runs from 710 ft on the north side to 980 ft on the north side.

Average elevation
860 ft 265 m
all land inside the county
Highest
980 ft 300 m
on the north side
Lowest
710 ft 215 m
on the north side

Wyandot County spans about 270 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land860 ft265 m
Highest point
Inside the county, on the north side
980 ft300 m
Lowest point
Inside the county, on the north side
710 ft215 m

Elevation profile, south to north

20 mi south to north through Crane Township.

Topographic Map

Topographic elevation map of Wyandot County, Ohio, shaded from 710 ft on the north side to 980 ft on the north side
County boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
County in Ohio, United States
Population
21,394 2024 est.
Land area
406.9 sq mi + 0.7 sq mi water
Density
53 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Central Lowland
Drains to
Great Lakes
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Crawford County1,020 ft
  2. Hardin County980 ft
  3. Marion County950 ft
  4. Wyandot County860 ft
  5. Hancock County810 ft
  6. Seneca County810 ft

Rankings by average elevation

  • Counties in Ohio54th highest of 88
  • Counties in the United States1,676th highest of 3,151
All 22 towns in Wyandot County by typical elevation
  1. Nevada930 ft
  2. Antrim Township930 ft
  3. Eden Township, Wyandot County920 ft
  4. Jackson Township, Wyandot County910 ft
  5. Harpster900 ft
  6. Marseilles Township890 ft
  7. Pitt Township880 ft
  8. Wharton880 ft
  9. Marseilles870 ft
  10. Mifflin Township, Wyandot County870 ft
  11. Kirby870 ft
  12. Richland Township, Wyandot County870 ft
  13. Ridge Township, Wyandot County850 ft
  14. Upper Sandusky850 ft
  15. Crane Township850 ft
  16. Sycamore Township, Wyandot County850 ft
  17. Sycamore850 ft
  18. Salem Township, Wyandot County840 ft
  19. Carey820 ft
  20. Crawford Township820 ft
  21. Tymochtee Township800 ft
  22. McCutchenville790 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 610 ft at 40.9618° N, 83.3490° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.