Richfield, OH Elevation & Topographic Map

Elevation

1,320 ft 400 m1,220 ft 375 m1,180 ft 360 m1,080 ft 330 m990 ft 300 m940 ft 285 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Village area: Fades everything outside the official village limits (US Census).

Elevation Data

Richfield sits at about 1,190 ft (365 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

1,190 ft 365 m

most residents: 1,050–1,270 ft

Lowest

940 ft 285 m

on the northeast side

Highest

1,320 ft 400 m

on the northwest side

Average

1,170 ft 355 m

all land inside village limits

Richfield spans about 380 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	1,190 ft365 m
Highest point Inside village limits, on the northwest side	1,320 ft400 m
Lowest point Inside village limits, on the northeast side	940 ft285 m
Town center USGS map point for Richfield	1,160 ft350 m
Average of all land	1,170 ft355 m

Elevation profile, west to east

2.2 mi west to east through the town center.

Topographic Map

Location: Village in Summit County, Ohio, United States
Population: 3,720 2024 est.
Land area: 9.3 sq mi
Density: 402 per sq mi
Coordinates: 41.2398° N, 81.6382° W
Time zone: Eastern UTC−5 / −4
Landform region: Appalachian Plateaus
Drains to: Cuyahoga River
ZIP codes 1: 44286

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Ohio112th highest of 2,572
Towns in Summit Countyhighest of 36

Peaks and hills nearest, by height

Acme Hill1,220 ft
Coal Hill1,200 ft
Nash Hill1,190 ft
Sherbondy Hill1,150 ft
Reeds Hill, Medina County1,150 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.