Pettisville, OH Elevation & Topographic Map

Elevation

770 ft 235 m770 ft 235 m760 ft 230 m750 ft 230 m750 ft 225 m740 ft 225 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Area: Fades everything outside the official CDP boundary (US Census).

Elevation Data

Pettisville sits at about 750 ft (230 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

750 ft 230 m

most residents: 750–760 ft

Lowest

740 ft 225 m

on the northwest side

Highest

760 ft 230 m

on the east side

Average

750 ft 230 m

all land inside the CDP boundary

Pettisville is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	750 ft230 m
Highest point Inside the CDP boundary, on the east side	760 ft230 m
Lowest point Inside the CDP boundary, on the northwest side	740 ft225 m
Town center USGS map point for Pettisville	760 ft230 m
Airport (USE) FAA airport elevation, the highest point of its runways, 6.6 mi northeast of the CDP boundary	781 ft238 m
Average of all land	750 ft230 m

Topographic Map

Location: Unincorporated community (census-designated place) in Fulton County, Ohio, United States
Population: 469 2020 Census
Land area: 1.0 sq mi
Density: 493 per sq mi
Coordinates: 41.5306° N, 84.2297° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Tiffin River → Maumee River
Airport: Fulton County (USE) 781 ft
ZIP codes 2: 43553 43567

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Ohio1,995th highest of 2,572
Towns in Fulton County11th highest of 22

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Pettisville is an unincorporated community; figures cover the census-designated place, a statistical area.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.