Newton Township, Pike County, OH Elevation & Topographic Map

Elevation

1,180 ft 360 m1,020 ft 310 m930 ft 285 m770 ft 235 m610 ft 185 m520 ft 160 m

Contours every 200 ft, bold every 1,000 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Township area: Fades everything outside the official township boundaries (US Census).

Elevation Data

Newton Township, Pike County sits at about 850 ft (260 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

850 ft 260 m

most residents: 550–930 ft

Lowest

520 ft 160 m

on the southeast side

Highest

1,180 ft 360 m

on Jasper Knob

Average

770 ft 235 m

all land inside township boundaries

Newton Township, Pike County spans about 660 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	850 ft260 m
Highest point Inside township boundaries, on Jasper Knob	1,180 ft360 m
Lowest point Inside township boundaries, on the southeast side	520 ft160 m
Average of all land	770 ft235 m

Elevation profile, south to north

6.0 mi south to north through the middle of Newton Township, Pike County.

Topographic Map

Location: Township in Pike County, Ohio, United States
Population: 1,794 2024 est.
Land area: 30.3 sq mi + 0.4 sq mi water
Density: 59 per sq mi
Coordinates: 39.0464° N, 83.0909° W
Time zone: Eastern UTC−5 / −4
Landform region: Appalachian Plateaus
Drains to: Scioto River → Ohio River → Mississippi River → Gulf of America

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Ohio1,600th highest of 2,572
Towns in Pike County8th highest of 19

Peaks and hills nearest, by height

Jasper Knob1,180 ft
Sponyers Knob1,170 ft
Swiger Knob1,170 ft
Painters Knob1,170 ft
Bald Knob, Pike County1,150 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.