Lake Seneca, OH Elevation & Topographic Map

Elevation

950 ft 290 m930 ft 285 m920 ft 280 m910 ft 275 m890 ft 270 m880 ft 270 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Area: Fades everything outside the official CDP boundary (US Census).

Elevation Data

Lake Seneca sits at about 910 ft (275 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

910 ft 275 m

most residents: 900–930 ft

Lowest

880 ft 270 m

on the southeast side

Highest

950 ft 290 m

on the northwest side

Average

920 ft 280 m

all land inside the CDP boundary

Lake Seneca spans about 70 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	910 ft275 m
Highest point Inside the CDP boundary, on the northwest side	950 ft290 m
Lowest point Inside the CDP boundary, on the southeast side	880 ft270 m
Town center USGS map point for Lake Seneca	930 ft285 m
Average of all land	920 ft280 m

Elevation profile, west to east

1.8 mi west to east through the town center.

Topographic Map

Location: Unincorporated community (census-designated place) in Williams County, Ohio, United States
Population: 529 2020 Census
Land area: 1.4 sq mi + 0.4 sq mi water
Density: 373 per sq mi
Coordinates: 41.6700° N, 84.6441° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Saint Joseph River → Maumee River
ZIP codes 1: 43543

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Ohio1,311th highest of 2,572
Towns in Williams County3rd highest of 26

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Lake Seneca is an unincorporated community; figures cover the census-designated place, a statistical area.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.