Harbor View, OH Elevation & Topographic Map

Elevation

610 ft 185 m600 ft 185 m600 ft 180 m590 ft 180 m580 ft 175 m580 ft 175 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Village area: Fades everything outside the official village limits (US Census).

Elevation Data

Harbor View sits at about 580 ft (175 m) above sea level, the median height of all land inside village limits (too few residents to weight by).

Typical elevation (all land)

580 ft 175 m

few residents

Lowest

580 ft 175 m

on the north side

Highest

580 ft 180 m

on the south side

Average

580 ft 175 m

all land inside village limits

Harbor View is nearly flat: its ground varies by only about 0 ft, so the figures below sit close together.

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	580 ft175 m
Highest point Inside village limits, on the south side	580 ft180 m
Lowest point Inside village limits, on the north side	580 ft175 m
Town center USGS map point for Harbor View	580 ft175 m
Airport (TDZ) FAA airport elevation, the highest point of its runways, 8.8 mi south of the village limits	623 ft190 m
Average of all land	580 ft175 m

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

How we measure

Typical elevation: the median height of all land inside the village limits; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.