Burkettsville, OH Elevation & Topographic Map

Elevation

1,000 ft 305 m990 ft 300 m990 ft 300 m980 ft 300 m970 ft 295 m960 ft 295 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Village area: Fades everything outside the official village limits (US Census).

Elevation Data

Burkettsville sits at about 970 ft (295 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

970 ft 295 m

most residents: 970–980 ft

Lowest

970 ft 295 m

on the north side

Highest

980 ft 300 m

on the southwest side

Average

970 ft 295 m

all land inside village limits

Burkettsville is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	970 ft295 m
Highest point Inside village limits, on the southwest side	980 ft300 m
Lowest point Inside village limits, on the north side	970 ft295 m
Town center USGS map point for Burkettsville	980 ft300 m
Average of all land	970 ft295 m

Topographic Map

Location: Village in Mercer and Darke counties, Ohio, United States
Population: 267 2024 est.
Land area: 0.2 sq mi
Density: 1,543 per sq mi
Coordinates: 40.3520° N, 84.6422° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Wabash River → Ohio River → Mississippi River → Gulf of America
ZIP codes 1: 45310

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Ohio939th highest of 2,572
Towns in Mercer Countyhighest of 24

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.