Blakeslee, OH Elevation & Topographic Map
Elevation
890 ft 270 m880 ft 270 m880 ft 265 m870 ft 265 m860 ft 260 m860 ft 260 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Blakeslee sits at about 870 ft (265 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
870 ft 265 m
most residents: 860–880 ft
Lowest
860 ft 260 m
on the south side
Highest
880 ft 270 m
on the north side
Average
870 ft 265 m
all land inside village limits
Blakeslee is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 870 ft265 m |
| Highest point Inside village limits, on the north side | 880 ft270 m |
| Lowest point Inside village limits, on the south side | 860 ft260 m |
| Town center USGS map point for Blakeslee | 860 ft265 m |
| Average of all land | 870 ft265 m |
Topographic Map
- Location
- Village in Williams County, Ohio, United States
- Population
- 106 2024 est.
- Land area
- 0.1 sq mi
- Density
- 1,128 per sq mi
- Coordinates
- 41.5242° N, 84.7302° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Saint Joseph River → Maumee River
- ZIP codes 1
- 43505
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Metz, IN990 ft
- Richland Township, Steuben County, IN960 ft
- Edon890 ft
- Florence Township, Williams County890 ft
- Troy Township, DeKalb County, IN870 ft
- Blakeslee870 ft
- Superior Township870 ft
- Montpelier860 ft
- St. Joseph Township840 ft
- Edgerton840 ft
- Center Township, Williams County810 ft
Rankings by typical elevation
- Towns in Ohio1,488th highest of 2,572
- Towns in Williams County11th highest of 26
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.