Bedford, OH Elevation & Topographic Map

Elevation
1,050 ft 320 m960 ft 290 m910 ft 275 m820 ft 250 m730 ft 220 m680 ft 210 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Bedford sits at about 960 ft (295 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
960 ft 295 m
most residents: 910–1,010 ft
Lowest
680 ft 210 m
on the southwest side
Highest
1,050 ft 320 m
on the northeast side
Average
950 ft 290 m
all land inside city limits
Bedford spans about 370 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 960 ft295 m |
| Highest point Inside city limits, on the northeast side | 1,050 ft320 m |
| Lowest point Inside city limits, on the southwest side | 680 ft210 m |
| Town center USGS map point for Bedford | 950 ft290 m |
| Average of all land | 950 ft290 m |
Elevation profile, west to east
2.7 mi west to east through the town center.
Topographic Map
- Location
- City in Cuyahoga County, Ohio, United States
- Population
- 12,834 2024 est.
- Land area
- 5.3 sq mi
- Density
- 2,402 per sq mi
- Coordinates
- 41.3931° N, 81.5365° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Cuyahoga River
- ZIP codes 1
- 44146
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Warrensville Heights1,050 ft
- Highland Hills1,050 ft
- North Randall1,050 ft
- Northfield1,040 ft
- Bedford Heights1,030 ft
- Village of Oakwood1,020 ft
- Bedford960 ft
- Walton Hills950 ft
- Maple Heights940 ft
- Garfield Heights910 ft
- Valley View750 ft
Rankings by typical elevation
- Towns in Ohio1,012th highest of 2,572
- Towns in Cuyahoga County24th highest of 59
Peaks and hills nearest, by height
- McConougheys Hill1,310 ft
- Sand Hill, Geauga County1,250 ft
- Orange Hill1,190 ft
- Gildersleeve Mountain1,160 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.