Auglaize County, OH Elevation & Topographic Map

Topographic elevation map of Auglaize County, Ohio, shaded from 810 ft on the northwest side to 1,100 ft on the northeast side
Elevation
1,100 ft 335 m1,030 ft 315 m990 ft 300 m920 ft 280 m840 ft 255 m810 ft 245 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Auglaize County averages about 930 ft (285 m) above sea level across all its land. Its ground runs from 810 ft on the northwest side to 1,100 ft on the northeast side.

Average elevation
930 ft 285 m
all land inside the county
Highest
1,100 ft 335 m
on the northeast side
Lowest
810 ft 245 m
on the northwest side

Auglaize County spans about 290 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land930 ft285 m
Highest point
Inside the county, on the northeast side
1,100 ft335 m
Lowest point
Inside the county, on the northwest side
810 ft245 m

Elevation profile, west to east

30 mi west to east through Duchouquet Township.

Topographic Map

Topographic elevation map of Auglaize County, Ohio, shaded from 810 ft on the northwest side to 1,100 ft on the northeast side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Ohio, United States
Population
45,922 2024 est.
Land area
401.4 sq mi + 0.5 sq mi water
Density
114 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Central Lowland
Drains to
Great Lakes 79%, Gulf of America 21%
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Logan County1,130 ft
  2. Shelby County1,010 ft
  3. Hardin County980 ft
  4. Auglaize County930 ft
  5. Mercer County890 ft
  6. Allen County860 ft
  7. Van Wert County790 ft

Rankings by average elevation

  • Counties in Ohio44th highest of 88
  • Counties in the United States1,541st highest of 3,151

Peaks and hills highest inside

  • Mount Lookout1,100 ft
All 25 towns in Auglaize County by typical elevation
  1. Waynesfield1,060 ft
  2. Wayne Township, Auglaize County1,060 ft
  3. New Hampshire1,030 ft
  4. Goshen Township, Auglaize County1,030 ft
  5. Clay Township, Auglaize County1,010 ft
  6. St. Johns1,010 ft
  7. Jackson Township, Auglaize County960 ft
  8. Minster960 ft
  9. Pusheta Township960 ft
  10. Union Township, Auglaize County960 ft
  11. New Bremen950 ft
  12. German Township, Auglaize County940 ft
  13. Uniopolis940 ft
  14. Washington Township, Auglaize County900 ft
  15. New Knoxville900 ft
  16. Wapakoneta900 ft
  17. Duchouquet Township900 ft
  18. Cridersville890 ft
  19. Moulton Township890 ft
  20. St. Marys Township880 ft
  21. St. Marys880 ft
  22. Noble Township, Auglaize County870 ft
  23. Buckland850 ft
  24. Logan Township850 ft
  25. Salem Township, Auglaize County830 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 590 ft at 40.6168° N, 84.2629° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.