Wells County, ND Elevation & Topographic Map

Topographic elevation map of Wells County, North Dakota, shaded from 1,420 ft on the northeast side to 2,240 ft on the southwest side
Elevation
2,240 ft 685 m2,040 ft 620 m1,930 ft 590 m1,730 ft 525 m1,520 ft 465 m1,420 ft 430 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Wells County averages about 1,690 ft (515 m) above sea level across all its land. Its ground runs from 1,420 ft on the northeast side to 2,240 ft on the southwest side.

Average elevation
1,690 ft 515 m
all land inside the county
Highest
2,240 ft 685 m
on the southwest side
Lowest
1,420 ft 430 m
on the northeast side

Wells County spans about 820 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,690 ft515 m
Highest point
Inside the county, on the southwest side
2,240 ft685 m
Lowest point
Inside the county, on the northeast side
1,420 ft430 m

Elevation profile, south to north

36 mi south to north through Harvey.

Topographic Map

Topographic elevation map of Wells County, North Dakota, shaded from 1,420 ft on the northeast side to 2,240 ft on the southwest side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in North Dakota, United States
Population
3,803 2024 est.
Land area
1,270.5 sq mi + 19.8 sq mi water
Density
3.0 per sq mi
Time zone
Central UTC−6 / −5
Landform regions
Central Lowland 87%, Great Plains 13%
Drains to
Gulf of America 63%, Canada 21%
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 44 towns in Wells County by typical elevation
  1. Lynn Township1,990 ft
  2. Silver Lake Township1,920 ft
  3. Bull Moose Township1,910 ft
  4. Hurdsfield1,910 ft
  5. Progress Township1,910 ft
  6. Crystal Lake Township1,890 ft
  7. Chaseley Township1,850 ft
  8. Berlin Township, Wells County1,850 ft
  9. Haaland Township1,810 ft
  10. Johnson Township1,810 ft
  11. Bowdon1,810 ft
  12. Speedwell Township1,750 ft
  13. Hawksnest Township1,730 ft
  14. West Ontario Township1,690 ft
  15. Delger Township1,680 ft
  16. Sykeston Township1,670 ft
  17. Pony Gulch Township1,640 ft
  18. Rusland Township1,640 ft
  19. Sykeston1,640 ft
  20. South Cottonwood Township1,630 ft
  21. Western Township1,620 ft
  22. St. Anna Township1,610 ft
  23. Forward Township1,610 ft
  24. Fessenden1,610 ft
  25. Manfred Township1,610 ft
  26. Oshkosh Township1,600 ft
  27. Hillsdale Township1,600 ft
  28. Cathay Township1,600 ft
  29. Bilodeau Township1,600 ft
  30. Wells Township1,600 ft
  31. West Norway Township1,600 ft
  32. Fram Township1,600 ft
  33. Harvey1,600 ft
  34. Germantown Township1,590 ft
  35. Heimdal Township1,590 ft
  36. Woodward Township1,590 ft
  37. Heimdal1,590 ft
  38. Hamburg Township1,580 ft
  39. Valhalla Township1,580 ft
  40. Cathay1,580 ft
  41. Norway Lake Township1,580 ft
  42. Fairville Township1,570 ft
  43. Bremen Township1,570 ft
  44. Hamberg1,550 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 1,420 ft at 47.8335° N, 99.3146° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.