Mercer County, ND Elevation & Topographic Map
Elevation
2,450 ft 745 m2,250 ft 685 m2,150 ft 655 m1,950 ft 595 m1,760 ft 535 m1,660 ft 505 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Mercer County averages about 2,020 ft (615 m) above sea level across all its land. Its ground runs from 1,660 ft on the east side to 2,450 ft on the southwest side.
Average elevation
2,020 ft 615 m
all land inside the county
Highest
2,450 ft 745 m
on the southwest side
Lowest
1,660 ft 505 m
on the east side
Mercer County spans about 790 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 2,020 ft615 m |
| Highest point Inside the county, on the southwest side | 2,450 ft745 m |
| Lowest point Inside the county, on the east side | 1,660 ft505 m |
Elevation profile, south to north
37 mi south to north through Beulah.
Topographic Map
- Location
- County in North Dakota, United States
- Population
- 8,348 2024 est.
- Land area
- 1,042.8 sq mi + 69.8 sq mi water
- Density
- 8.0 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Great Plains
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Stark County2,490 ft
- Dunn County2,260 ft
- Oliver County2,050 ft
- Morton County2,030 ft
- Mercer County2,020 ft
- McLean County1,970 ft
Rankings by average elevation
- Counties in North Dakota19th highest of 53
- Counties in the United States618th highest of 3,151
Peaks and hills highest inside
- Medicine Butte2,349 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.