Adams County, ND Elevation & Topographic Map

Elevation
3,130 ft 955 m2,910 ft 885 m2,800 ft 855 m2,590 ft 790 m2,370 ft 720 m2,260 ft 690 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Adams County averages about 2,630 ft (800 m) above sea level across all its land. Its ground runs from 2,260 ft on the east side to 3,130 ft on the west side.
Average elevation
2,630 ft 800 m
all land inside the county
Highest
3,130 ft 955 m
on the west side
Lowest
2,260 ft 690 m
on the east side
Adams County spans about 870 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 2,630 ft800 m |
| Highest point Inside the county, on the west side | 3,130 ft955 m |
| Lowest point Inside the county, on the east side | 2,260 ft690 m |
Elevation profile, west to east
48 mi west to east through Hettinger.
Topographic Map
- Location
- County in North Dakota, United States
- Population
- 2,141 2024 est.
- Land area
- 987.5 sq mi + 1.1 sq mi water
- Density
- 2.2 per sq mi
- Time zone
- Mountain UTC−7 / −6
- Landform region
- Great Plains
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Harding County, SD3,060 ft
- Bowman County2,940 ft
- Slope County2,830 ft
- Adams County2,630 ft
- Perkins County, SD2,600 ft
- Hettinger County2,550 ft
- Grant County2,220 ft
- Corson County, SD2,100 ft
- Sioux County2,020 ft
Rankings by average elevation
- Counties in North Dakota4th highest of 53
- Counties in the United States460th highest of 3,151
Peaks and hills highest inside
- Wolf Butte, Adams County3,040 ft
- Cow Butte2,880 ft
- Long Butte, Adams County2,800 ft
- Pearl Butte, Adams County2,780 ft
- Taylor Butte2,770 ft
All 21 towns in Adams County by typical elevation
- Bucyrus Township2,840 ft
- Reeder2,820 ft
- Wolf Butte Township2,800 ft
- Bucyrus2,780 ft
- Reeder Township2,770 ft
- Hettinger Township2,720 ft
- Hettinger2,720 ft
- Duck Creek Township2,690 ft
- Darling Springs Township2,690 ft
- Lightning Creek Township2,680 ft
- Scott Township2,680 ft
- Maine Township2,640 ft
- Cedar Township2,610 ft
- Clermont Township2,590 ft
- Taylor Butte Township2,580 ft
- Haynes2,550 ft
- Gilstrap Township2,520 ft
- Chandler Township2,510 ft
- Orange Township2,500 ft
- Beisigl Township2,430 ft
- South Fork Township2,380 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 2,260 ft at 46.0526° N, 101.9996° W, is in such a hollow or patch and is not counted.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.