Thomasville, NC Elevation & Topographic Map

Elevation
950 ft 290 m890 ft 270 m860 ft 260 m790 ft 240 m730 ft 220 m690 ft 210 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Thomasville sits at about 840 ft (255 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
840 ft 255 m
most residents: 790–880 ft
Lowest
690 ft 210 m
on the northwest side
Highest
950 ft 290 m
on the south side
Average
830 ft 255 m
all land inside city limits
Thomasville spans about 260 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 840 ft255 m |
| Highest point Inside city limits, on the south side | 950 ft290 m |
| Lowest point Inside city limits, on the northwest side | 690 ft210 m |
| Town center USGS map point for Thomasville | 850 ft260 m |
| Average of all land | 830 ft255 m |
Elevation profile, south to north
6.2 mi south to north through the town center.
Topographic Map
- Location
- City in Davidson and Randolph counties, North Carolina, United States
- Population
- 27,605 2024 est.
- Land area
- 16.9 sq mi
- Density
- 1,636 per sq mi
- Coordinates
- 35.8826° N, 80.0820° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Piedmont
- Drains to
- Great Pee Dee River → Atlantic Ocean
- ZIP codes 1
- 27360
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Wallburg880 ft
- High Point860 ft
- Midway840 ft
- Thomasville840 ft
- Trinity820 ft
- Welcome810 ft
- Archdale800 ft
- Jamestown800 ft
- Lexington760 ft
- Yadkin College710 ft
- Randleman700 ft
Rankings by typical elevation
- Towns in North Carolina196th highest of 782
- Towns in Davidson County3rd highest of 9
Peaks and hills nearest, by height
- Bull Mountain3,212 ft
- Pores Knob2,673 ft
- Moores Knob2,580 ft
- Three Hat Mountain1,180 ft
- Rush Mountain, Randolph County670 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.