Marble, NC Elevation & Topographic Map

Topographic elevation map of Marble, North Carolina, shaded from 1,600 ft on the southwest side to 2,260 ft at the foot of the Unicoi Mountains
Elevation
2,260 ft 690 m2,100 ft 640 m2,010 ft 615 m1,850 ft 565 m1,680 ft 515 m1,600 ft 485 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Marble sits at about 1,710 ft (520 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
1,710 ft 520 m
most residents: 1,670–1,960 ft
Lowest
1,600 ft 485 m
on the southwest side
Highest
2,260 ft 690 m
at the foot of the Unicoi Mountains
Average
1,780 ft 540 m
all land inside the CDP boundary

Marble spans about 660 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
1,710 ft520 m
Highest point
Inside the CDP boundary, at the foot of the Unicoi Mountains
2,260 ft690 m
Lowest point
Inside the CDP boundary, on the southwest side
1,600 ft485 m
Town center
USGS map point for Marble
1,680 ft510 m
Airport (RHP)
FAA airport elevation, the highest point of its runways, 3.3 mi east of the CDP boundary
1,699 ft518 m
Average of all land1,780 ft540 m
Nearest peak
Teyahalee Bald, 8.5 mi northeast of the CDP boundary
4,710 ft1,435 m

Elevation profile, south to north

1.4 mi south to north through the town center.

Topographic Map

Topographic elevation map of Marble, North Carolina, shaded from 1,600 ft on the southwest side to 2,260 ft at the foot of the Unicoi Mountains
CDP boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
Unincorporated community (census-designated place) in Cherokee County, North Carolina, United States
Population
278 2020 Census
Land area
1.1 sq mi
Density
255 per sq mi
Coordinates
35.1751° N, 83.9249° W
Time zone
Eastern UTC−5 / −4
Landform region
Blue Ridge
Drains to
Hiwassee River → Tennessee River → Ohio River → Mississippi River → Gulf of America
Airport
Western Carolina Regional (RHP) 1,699 ft
ZIP codes 1
28905
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Marble is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.