Hassell, NC Elevation & Topographic Map

Elevation
100 ft 30 m97 ft 30 m93 ft 28 m84 ft 26 m76 ft 23 m72 ft 22 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Hassell sits at about 78 ft (24 m) above sea level, the median height of all land inside town limits (too few residents to weight by).
Typical elevation (all land)
78 ft 24 m
few residents
Lowest
72 ft 22 m
on the north side
Highest
79 ft 24 m
on the southwest side
Average
78 ft 24 m
all land inside town limits
Hassell is nearly flat: its ground varies by only about 7 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 78 ft24 m |
| Highest point Inside town limits, on the southwest side | 79 ft24 m |
| Lowest point Inside town limits, on the north side | 72 ft22 m |
| Town center USGS map point for Hassell | 79 ft24 m |
| Airport (MCZ) FAA airport elevation, the highest point of its runways, 5.9 mi southeast of the town limits | 75 ft23 m |
| Average of all land | 78 ft24 m |
Topographic Map
- Location
- Town in Martin County, North Carolina, United States
- Population
- 47 2024 est.
- Land area
- 0.3 sq mi
- Density
- 177 per sq mi
- Coordinates
- 35.9079° N, 77.2786° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Roanoke River → Atlantic Ocean
- Airport
- Martin County (MCZ) 75 ft
- ZIP codes 1
- 27841
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Hobgood89 ft
- Oak City81 ft
- Hassell78 ft
- Parmele74 ft
- Hamilton73 ft
- Robersonville71 ft
- Bethel64 ft
- Speed64 ft
- Everetts61 ft
- Bear Grass56 ft
- Conetoe50 ft
Rankings by typical elevation
- Towns in North Carolina563rd highest of 782
- Towns in Martin County2nd highest of 9
How we measure
- Typical elevation: the median height of all land inside the town limits; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.