Falcon, NC Elevation & Topographic Map

Elevation
170 ft 50 m160 ft 50 m150 ft 45 m140 ft 40 m120 ft 40 m120 ft 35 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Falcon sits at about 140 ft (40 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
140 ft 40 m
most residents: 130–150 ft
Lowest
120 ft 35 m
on the southeast side
Highest
170 ft 50 m
on the southwest side
Average
140 ft 45 m
all land inside town limits
Falcon spans about 50 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 140 ft40 m |
| Highest point Inside town limits, on the southwest side | 170 ft50 m |
| Lowest point Inside town limits, on the southeast side | 120 ft35 m |
| Town center USGS map point for Falcon | 140 ft45 m |
| Average of all land | 140 ft45 m |
Elevation profile, west to east
1.0 mi west to east through the town center.
Topographic Map
- Location
- Town in Cumberland County, North Carolina, United States
- Population
- 395 2024 est.
- Land area
- 1.4 sq mi
- Density
- 280 per sq mi
- Coordinates
- 35.1899° N, 78.6483° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- South River → Cape Fear River → Atlantic Ocean
- ZIP codes 2
- 28331 28342
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Dunn200 ft
- Plain View190 ft
- Spivey's Corner190 ft
- Erwin190 ft
- Godwin160 ft
- Bunnlevel140 ft
- Falcon140 ft
- Wade130 ft
- Eastover130 ft
- Stedman130 ft
- Linden110 ft
Rankings by typical elevation
- Towns in North Carolina493rd highest of 782
- Towns in Cumberland County5th highest of 10
Peaks and hills nearest, by height
- Killens Hill290 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.