Carolina Shores, NC Elevation & Topographic Map

Elevation

60 ft 18 m52 ft 16 m47 ft 14 m39 ft 12 m31 ft 9 m27 ft 8 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Carolina Shores sits at about 42 ft (13 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

42 ft 13 m

most residents: 37–48 ft

Lowest

27 ft 8 m

on the north side

Highest

57 ft 17 m

on the southwest side

Average

42 ft 13 m

all land inside town limits

Carolina Shores spans about 30 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	42 ft13 m
Highest point Inside town limits, on the southwest side	57 ft17 m
Lowest point Inside town limits, on the north side	27 ft8 m
Town center USGS map point for Carolina Shores	46 ft14 m
Airport (60J) FAA airport elevation, the highest point of its runways, 7.0 mi east of the town limits	33 ft10 m
Average of all land	42 ft13 m

Topographic Map

Location: Town in Brunswick County, North Carolina, United States
Population: 5,463 2024 est.
Land area: 2.9 sq mi
Density: 1,883 per sq mi
Coordinates: 33.9010° N, 78.5806° W
Time zone: Eastern UTC−5 / −4
Landform region: Coastal Plain
Drains to: Waccamaw River → Atlantic Ocean
Airport: Odell Williamson Municipal (60J) 33 ft
ZIP codes 1: 28467

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in North Carolina630th highest of 782
Towns in Brunswick County4th highest of 19

Peaks and hills nearest, by height

Sand Hill, Brunswick County56 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.