Mill Neck, NY Elevation & Topographic Map
Elevation
230 ft 70 m170 ft 55 m140 ft 45 m87 ft 26 m29 ft 9 m0 ft 0 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Mill Neck sits at about 110 ft (35 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
110 ft 35 m
most residents: 58–200 ft
Lowest
0 ft 0 m
at sea level on Oyster Bay Harbor
Highest
230 ft 70 m
on the southeast side
Average
89 ft 27 m
all land inside village limits
Mill Neck spans about 230 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 110 ft35 m |
| Highest point Inside village limits, on the southeast side | 230 ft70 m |
| Lowest point Where the land meets Oyster Bay Harbor | 0 ft0 m |
| Town center USGS map point for Mill Neck | 130 ft40 m |
| Airport (HPN) FAA airport elevation, the highest point of its runways, 14 mi northwest of the village limits | 439 ft134 m |
| Average of all land | 89 ft27 m |
Elevation profile, south to north
2.1 mi south to north through the town center.
Topographic Map
- Location
- Village in Nassau County, New York, United States
- Population
- 1,008 2024 est.
- Land area
- 2.6 sq mi + 0.3 sq mi water
- Density
- 385 per sq mi
- Coordinates
- 40.8870° N, 73.5551° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Long Island Sound
- Airport
- Westchester County (HPN) 439 ft
- ZIP codes 1
- 11765
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Oyster Bay Cove210 ft
- East Norwich190 ft
- Upper Brookville170 ft
- Matinecock150 ft
- Cove Neck140 ft
- Locust Valley130 ft
- Oyster Bay120 ft
- Mill Neck110 ft
- Centre Island55 ft
- Lattingtown50 ft
- Bayville17 ft
Rankings by typical elevation
- Towns in New York1,853rd highest of 2,097
- Towns in Nassau County49th highest of 135
Peaks and hills nearest, by height
- South Beacon Mountain1,600 ft
- West Hills390 ft
- Harbor Hill, Nassau County370 ft
- Mannetto Hills300 ft
- Sagamore Hill170 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −4 ft at 40.8874° N, 73.5474° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.