Fulton County, NY Elevation & Topographic Map

Topographic elevation map of Fulton County, New York, shaded from 450 ft on the south side to 2,800 ft on Pigeon Mountain
Elevation
2,800 ft 855 m2,210 ft 675 m1,920 ft 585 m1,330 ft 405 m750 ft 225 m450 ft 140 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Fulton County averages about 1,240 ft (380 m) above sea level across all its land. Its ground runs from 450 ft on the south side to 2,800 ft on Pigeon Mountain.

Average elevation
1,240 ft 380 m
all land inside the county
Highest
2,800 ft 855 m
on Pigeon Mountain
Lowest
450 ft 140 m
on the south side

Fulton County spans about 2,350 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,240 ft380 m
Highest point
Inside the county, on Pigeon Mountain (3DEP terrain model; no NGS survey height)
2,800 ft855 m
Lowest point
Inside the county, on the south side
450 ft140 m

Elevation profile, south to north

18 mi south to north through Gloversville.

Topographic Map

Topographic elevation map of Fulton County, New York, shaded from 450 ft on the south side to 2,800 ft on Pigeon Mountain
County boundary (dashed) over shaded terrain, with contours every 200 ft (61 m).
Location
County in New York, United States
Population
52,073 2024 est.
Land area
495.5 sq mi + 37.4 sq mi water
Density
105 per sq mi
Time zone
Eastern UTC−5 / −4
Landform regions
Appalachian Plateaus 65%, Adirondack 36%
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 17 towns in Fulton County by typical elevation
  1. Caroga1,500 ft
  2. Caroga Lake1,480 ft
  3. Bleecker1,450 ft
  4. Stratford1,240 ft
  5. Ephratah1,020 ft
  6. Oppenheim960 ft
  7. Town of Johnstown870 ft
  8. Broadalbin860 ft
  9. Gloversville850 ft
  10. Perth840 ft
  11. Village of Mayfield830 ft
  12. Mayfield830 ft
  13. Village of Broadalbin820 ft
  14. Dolgeville partly810 ft
  15. Northampton810 ft
  16. Village of Northville800 ft
  17. Johnstown690 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.