Florence, NJ Elevation & Topographic Map

Topographic elevation map of Florence, New Jersey, shaded from 1 ft on the west side to 86 ft on the east side
Elevation
86 ft 26 m65 ft 20 m54 ft 16 m33 ft 10 m11 ft 3 m1 ft 0 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Florence sits at about 30 ft (9 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
30 ft 9 m
most residents: 21–57 ft
Lowest
1 ft 0 m
on the west side
Highest
86 ft 26 m
on the east side
Average
31 ft 10 m
all land inside the CDP boundary

Florence spans about 85 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
30 ft9 m
Highest point
Inside the CDP boundary, on the east side
86 ft26 m
Lowest point
Inside the CDP boundary, on the west side
1 ft0 m
Town center
USGS map point for Florence
26 ft8 m
Airport (TTN)
FAA airport elevation, the highest point of its runways, 10 mi north of the CDP boundary
213 ft65 m
Average of all land31 ft10 m

Elevation profile, west to east

1.8 mi west to east through the town center.

Topographic Map

Topographic elevation map of Florence, New Jersey, shaded from 1 ft on the west side to 86 ft on the east side
CDP boundary (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Unincorporated community (census-designated place) in Burlington County, New Jersey, United States
Population
4,704 2020 Census
Land area
1.2 sq mi + 0.2 sq mi water
Density
3,766 per sq mi
Coordinates
40.1196° N, 74.8054° W
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain
Drains to
Delaware River → Atlantic Ocean
Airport
Trenton Mercer (TTN) 213 ft
ZIP codes 1
08518
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

  1. Falls Township, PA78 ft
  2. Levittown, PA58 ft
  3. Fieldsboro56 ft
  4. Roebling45 ft
  5. Florence Township43 ft
  6. Burlington Township42 ft
  7. Bristol Township, PA33 ft
  8. Tullytown, PA32 ft
  9. Florence30 ft
  10. Bristol, PA22 ft
  11. Burlington9 ft

Rankings by typical elevation

Peaks and hills nearest, by height

  • Mount Pisgah180 ft
  • Mount Holly180 ft
  • Mount Laurel170 ft
  • Taylors Mountain140 ft
  • Laurel Hill, Burlington County45 ft
How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −3 ft at 40.1218° N, 74.8254° W, is in such a hollow or patch and is not counted.
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Florence is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.