Elsinboro Township, NJ Elevation & Topographic Map

Elevation
29 ft 9 m21 ft 6 m17 ft 5 m8 ft 3 m0 ft 0 m−4 ft −1 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Elsinboro Township sits at about 4 ft (1 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
4 ft 1 m
most residents: 1–9 ft
Lowest
−4 ft −1 m
on the northeast side
Highest
19 ft 6 m
on the northeast side
Average
4 ft 1 m
all land inside township boundaries
Elsinboro Township is nearly flat: its ground varies by only about 23 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 4 ft1 m |
| Highest point Inside township boundaries, on the northeast side | 19 ft6 m |
| Lowest point Inside township boundaries, on the northeast side | −4 ft−1 m |
| Airport (ILG) FAA airport elevation, the highest point of its runways, 8.5 mi northwest of the township boundaries | 80 ft24 m |
| Average of all land | 4 ft1 m |
Topographic Map
- Location
- Township in Salem County, New Jersey, United States
- Population
- 1,016 2024 est.
- Land area
- 11.9 sq mi + 1.4 sq mi water
- Density
- 85 per sq mi
- Coordinates
- 39.5492° N, 75.5073° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Atlantic Ocean
- Airport
- New Castle (ILG) 80 ft
- ZIP codes 1
- 08079
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Quinton Township29 ft
- Mannington Township22 ft
- Quinton19 ft
- Lower Alloways Creek Township15 ft
- Delaware City, DE9 ft
- Salem8 ft
- Pennsville Township8 ft
- Pennsville7 ft
- Port Penn, DE5 ft
- Hancocks Bridge4 ft
- Elsinboro Township4 ft
Rankings by typical elevation
- Towns in New Jersey938th highest of 941
- Towns in Salem Countylowest of 23
Peaks and hills nearest, by height
- Coffin Hill120 ft
- Big Mannington Hill120 ft
- Pine Mount93 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −5 ft at 39.5096° N, 75.4887° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.