Camden County, NJ Elevation & Topographic Map

Topographic elevation map of Camden County, New Jersey, shaded from 0 ft on the west side to 220 ft on the west side
Elevation
220 ft 65 m160 ft 50 m140 ft 40 m82 ft 25 m27 ft 8 m0 ft 0 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Camden County averages about 91 ft (28 m) above sea level across all its land. Its ground runs from 0 ft on the west side to 220 ft on the west side.

Average elevation
91 ft 28 m
all land inside the county
Highest
220 ft 65 m
on the west side
Lowest
0 ft 0 m
on the west side

Camden County spans about 220 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land91 ft28 m
Highest point
Inside the county, on the west side
220 ft65 m
Lowest point
Inside the county, on the west side
0 ft0 m

Elevation profile, south to north

17 mi south to north through Cherry Hill Township.

Topographic Map

Topographic elevation map of Camden County, New Jersey, shaded from 0 ft on the west side to 220 ft on the west side
County boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
County in New Jersey, United States
Population
533,988 2024 est.
Land area
221.4 sq mi + 6.1 sq mi water
Density
2,412 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Philadelphia County, PA120 ft
  2. Camden County91 ft
  3. Gloucester County87 ft
  4. Burlington County69 ft
  5. Atlantic County45 ft

Rankings by average elevation

Peaks and hills highest inside

  • Pine Hill200 ft
  • Hutton Hill170 ft
All 52 towns in Camden County by typical elevation
  1. West Berlin170 ft
  2. Berlin Township160 ft
  3. Berlin160 ft
  4. Pine Hill150 ft
  5. Sicklerville140 ft
  6. Chesilhurst140 ft
  7. Winslow Township140 ft
  8. Atco130 ft
  9. Waterford Township130 ft
  10. Voorhees Township100 ft
  11. Gibbsboro97 ft
  12. Springdale91 ft
  13. Lindenwold84 ft
  14. Gloucester Township83 ft
  15. Laurel Springs82 ft
  16. Hi-Nella82 ft
  17. Echelon81 ft
  18. Clementon80 ft
  19. Stratford79 ft
  20. Greentree77 ft
  21. Magnolia77 ft
  22. Merchantville76 ft
  23. Lawnside73 ft
  24. Blackwood72 ft
  25. Ellisburg72 ft
  26. Somerdale71 ft
  27. Grenloch partly67 ft
  28. Haddon Heights66 ft
  29. Ashland65 ft
  30. Haddonfield64 ft
  31. Cherry Hill Township62 ft
  32. Barrington61 ft
  33. Audubon58 ft
  34. Runnemede57 ft
  35. Cherry Hill Mall54 ft
  36. Glendora53 ft
  37. Tavistock50 ft
  38. Kingston Estates49 ft
  39. Barclay47 ft
  40. Westmont47 ft
  41. Pennsauken Township46 ft
  42. Haddon Township45 ft
  43. Bellmawr41 ft
  44. Golden Triangle36 ft
  45. Oaklyn28 ft
  46. Collingswood27 ft
  47. Mount Ephraim27 ft
  48. Camden20 ft
  49. Audubon Park18 ft
  50. Gloucester City17 ft
  51. Brooklawn16 ft
  52. Woodlynne15 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −8 ft at 39.9857° N, 75.0549° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.