Milton Mills, NH Elevation & Topographic Map
Elevation
700 ft 210 m630 ft 190 m590 ft 180 m520 ft 160 m450 ft 140 m420 ft 130 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Milton Mills sits at about 480 ft (150 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
480 ft 150 m
most residents: 440–560 ft
Lowest
420 ft 130 m
on the south side
Highest
700 ft 210 m
on the north edge, below higher ground just outside
Average
500 ft 155 m
all land inside the CDP boundary
Milton Mills spans about 280 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 480 ft150 m |
| Highest point Inside the CDP boundary, on the north edge, below higher ground just outside | 700 ft210 m |
| Lowest point Inside the CDP boundary, on the south side | 420 ft130 m |
| Town center USGS map point for Milton Mills | 450 ft135 m |
| Average of all land | 500 ft155 m |
| Nearest peak Copple Crown Mountain, 7.4 mi west of the CDP boundary | 1,870 ft570 m |
Elevation profile, south to north
1.2 mi south to north through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Strafford County, New Hampshire, United States
- Population
- 313 2020 Census
- Land area
- 0.9 sq mi
- Density
- 363 per sq mi
- Coordinates
- 43.5012° N, 70.9637° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- New England
- Drains to
- Atlantic Ocean
- ZIP codes 1
- 03852
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Middleton700 ft
- Brookfield680 ft
- Wakefield630 ft
- Acton, ME610 ft
- Sanbornville580 ft
- Shapleigh, ME570 ft
- Milton550 ft
- Union490 ft
- Milton Mills480 ft
- Lebanon, ME360 ft
- Farmington360 ft
Rankings by typical elevation
- Towns in New Hampshire179th highest of 260
- Towns in Strafford County5th highest of 14
Peaks and hills nearest, by height
- Mount Shaw2,990 ft
- Belknap Mountain2,382 ft
- Green Mountain1,910 ft
- Copple Crown Mountain1,870 ft
- Cragged Mountain1,810 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Milton Mills is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.