Toole County, MT Elevation & Topographic Map

Topographic elevation map of Toole County, Montana, shaded from 2,990 ft on the southeast side to 6,990 ft on West Butte
Elevation
6,990 ft 2,130 m5,990 ft 1,825 m5,490 ft 1,675 m4,490 ft 1,370 m3,490 ft 1,065 m2,990 ft 910 m
Zoom in for contour lines
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Toole County averages about 3,520 ft (1,070 m) above sea level across all its land. Its ground runs from 2,990 ft on the southeast side to 6,990 ft on West Butte.

Average elevation
3,520 ft 1,070 m
all land inside the county
Highest
6,990 ft 2,130 m
on West Butte
Lowest
2,990 ft 910 m
on the southeast side

Toole County spans about 4,000 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land3,520 ft1,070 m
Highest point
Inside the county, on West Butte (3DEP terrain model; no NGS survey height)
6,990 ft2,130 m
Lowest point
Inside the county, on the southeast side
2,990 ft910 m

Elevation profile, west to east

42 mi west to east through Shelby.

Topographic Map

Topographic elevation map of Toole County, Montana, shaded from 2,990 ft on the southeast side to 6,990 ft on West Butte
County boundary (dashed) over shaded terrain, with contours every 200 ft (61 m).
Location
County in Montana, United States
Population
5,153 2024 est.
Land area
1,914.9 sq mi + 30.1 sq mi water
Density
2.7 per sq mi
Time zone
Mountain UTC−7 / −6
Landform region
Great Plains
Drains to
Gulf of America 83%, Closed basin (does not reach the sea) 17%
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 7 towns in Toole County by typical elevation
  1. Rimrock Colony3,980 ft
  2. Hillside Colony3,600 ft
  3. Sweet Grass3,550 ft
  4. Camrose Colony3,480 ft
  5. Sunburst3,380 ft
  6. Kevin3,360 ft
  7. Shelby3,330 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 2 arc-second (≈200 ft, 62 m) grid, coarsened from 1 arc-second so the whole area fits one run. Land means the boundary minus Census area water (on this grid, water areas of at least half a cell).
  • Highest and lowest: the highest land cell, re-read at 1 arc-second around the 25 highest grid cells; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell, re-read at 1 arc-second around the 25 lowest grid cells; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.