Pulaski County, MO Elevation & Topographic Map

Topographic elevation map of Pulaski County, Missouri, shaded from 670 ft on the northeast side to 1,320 ft on the south side
Elevation
1,320 ft 405 m1,160 ft 355 m1,080 ft 330 m910 ft 280 m750 ft 230 m670 ft 205 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Pulaski County averages about 990 ft (305 m) above sea level across all its land. Its ground runs from 670 ft on the northeast side to 1,320 ft on the south side.

Average elevation
990 ft 305 m
all land inside the county
Highest
1,320 ft 405 m
on the south side
Lowest
670 ft 205 m
on the northeast side

Pulaski County spans about 650 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land990 ft305 m
Highest point
Inside the county, on the south side
1,320 ft405 m
Lowest point
Inside the county, on the northeast side
670 ft205 m

Elevation profile, south to north

28 mi south to north through Fort Leonard Wood.

Topographic Map

Topographic elevation map of Pulaski County, Missouri, shaded from 670 ft on the northeast side to 1,320 ft on the south side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Missouri, United States
Population
53,964 2024 est.
Land area
547.2 sq mi + 4.4 sq mi water
Density
99 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Ozark Plateaus
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 6 towns in Pulaski County by typical elevation
  1. Dixon1,170 ft
  2. Richland1,100 ft
  3. Fort Leonard Wood1,090 ft
  4. Crocker1,080 ft
  5. St. Robert1,010 ft
  6. Waynesville950 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.