Harrison County, MO Elevation & Topographic Map

Elevation
1,200 ft 365 m1,090 ft 330 m1,030 ft 315 m920 ft 280 m810 ft 250 m760 ft 230 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Harrison County averages about 970 ft (295 m) above sea level across all its land. Its ground runs from 760 ft on the southeast side to 1,200 ft on the northwest side.
Average elevation
970 ft 295 m
all land inside the county
Highest
1,200 ft 365 m
on the northwest side
Lowest
760 ft 230 m
on the southeast side
Harrison County spans about 440 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 970 ft295 m |
| Highest point Inside the county, on the northwest side | 1,200 ft365 m |
| Lowest point Inside the county, on the southeast side | 760 ft230 m |
Elevation profile, south to north
30 mi south to north through Bethany Township.
Topographic Map
- Location
- County in Missouri, United States
- Population
- 8,186 2024 est.
- Land area
- 722.5 sq mi + 3.9 sq mi water
- Density
- 11 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Ringgold County, IA1,140 ft
- Decatur County, IA1,050 ft
- Worth County1,030 ft
- Harrison County970 ft
- Mercer County960 ft
- Gentry County950 ft
- Daviess County870 ft
- Grundy County840 ft
Rankings by average elevation
- Counties in Missouri29th highest of 114
- Counties in the United States1,453rd highest of 3,151
All 28 towns in Harrison County by typical elevation
- Lincoln Township, Harrison County1,110 ft
- Eagleville1,090 ft
- Blythedale1,070 ft
- Colfax Township, Harrison County1,070 ft
- Union Township, Harrison County1,070 ft
- Washington Township, Harrison County1,060 ft
- Ridgeway1,050 ft
- Marion Township, Harrison County1,050 ft
- Hamilton Township, Harrison County1,050 ft
- Grant Township, Harrison County1,040 ft
- Dallas Township, Harrison County1,040 ft
- Sherman Township, Harrison County990 ft
- White Oak Township, Harrison County980 ft
- Adams Township, Harrison County980 ft
- Gilman City980 ft
- New Hampton970 ft
- Jefferson Township, Harrison County970 ft
- Sugar Creek Township970 ft
- Clay Township, Harrison County960 ft
- Butler Township940 ft
- Bethany Township930 ft
- Bethany930 ft
- Cypress Township910 ft
- Fox Creek Township900 ft
- Madison Township, Harrison County870 ft
- Cainsville870 ft
- Trail Creek Township860 ft
- Mount Moriah840 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 750 ft at 40.1421° N, 93.7738° W, is in such a hollow or patch and is not counted.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.