Bellflower, MO Elevation & Topographic Map
Elevation
780 ft 235 m770 ft 235 m760 ft 235 m750 ft 230 m740 ft 225 m740 ft 225 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Bellflower sits at about 770 ft (235 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
770 ft 235 m
most residents: 760–780 ft
Lowest
740 ft 225 m
on the east side
Highest
780 ft 235 m
on the south side
Average
760 ft 235 m
all land inside city limits
Bellflower spans about 40 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 770 ft235 m |
| Highest point Inside city limits, on the south side | 780 ft235 m |
| Lowest point Inside city limits, on the east side | 740 ft225 m |
| Town center USGS map point for Bellflower | 770 ft235 m |
| Average of all land | 760 ft235 m |
Elevation profile, south to north
0.8 mi south to north through the town center.
Topographic Map
- Location
- City in Montgomery County, Missouri, United States
- Population
- 337 2024 est.
- Land area
- 0.6 sq mi
- Density
- 603 per sq mi
- Coordinates
- 39.0067° N, 91.3552° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Mississippi River → Gulf of America
- ZIP codes 1
- 63333
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Jonesburg890 ft
- High Hill890 ft
- New Florence860 ft
- Montgomery City820 ft
- Wellsville810 ft
- Danville810 ft
- Bellflower770 ft
- Buell750 ft
- Truxton740 ft
- Hawk Point730 ft
- Middletown700 ft
Rankings by typical elevation
- Towns in Missouri873rd highest of 1,352
- Towns in Montgomery County7th highest of 12
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.