Taopi, MN Elevation & Topographic Map
Elevation
1,360 ft 415 m1,350 ft 410 m1,340 ft 410 m1,340 ft 405 m1,330 ft 405 m1,320 ft 405 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Taopi sits at about 1,350 ft (410 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,350 ft 410 m
nearly all residents at this height
Lowest
1,320 ft 405 m
on the east side
Highest
1,350 ft 415 m
on the north side
Average
1,340 ft 410 m
all land inside city limits
Taopi spans about 30 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,350 ft410 m |
| Highest point Inside city limits, on the north side | 1,350 ft415 m |
| Lowest point Inside city limits, on the east side | 1,320 ft405 m |
| Town center USGS map point for Taopi | 1,350 ft410 m |
| Average of all land | 1,340 ft410 m |
Topographic Map
- Location
- City in Mower County, Minnesota, United States
- Population
- 68 2024 est.
- Land area
- 0.4 sq mi
- Density
- 174 per sq mi
- Coordinates
- 43.5580° N, 92.6427° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Upper Iowa River → Mississippi River → Gulf of America
- ZIP codes 1
- 55977
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Clayton Township1,400 ft
- Elkton1,390 ft
- Bennington Township1,360 ft
- Lodi Township1,350 ft
- Taopi1,350 ft
- Marshall Township1,330 ft
- Le Roy Township1,300 ft
- Adams1,290 ft
- Le Roy1,280 ft
- Adams Township1,280 ft
- Meyer, IA1,260 ft
Rankings by typical elevation
- Towns in Minnesota528th highest of 2,692
- Towns in Mower County9th highest of 35
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.