Randolph, MN Elevation & Topographic Map
Elevation
940 ft 285 m920 ft 280 m910 ft 275 m890 ft 270 m870 ft 265 m860 ft 260 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Randolph sits at about 890 ft (270 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
890 ft 270 m
most residents: 880–910 ft
Lowest
860 ft 260 m
on the southeast side
Highest
940 ft 285 m
on the northwest side
Average
880 ft 270 m
all land inside city limits
Randolph spans about 80 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 890 ft270 m |
| Highest point Inside city limits, on the northwest side | 940 ft285 m |
| Lowest point Inside city limits, on the southeast side | 860 ft260 m |
| Town center USGS map point for Randolph | 880 ft270 m |
| Average of all land | 880 ft270 m |
Topographic Map
- Location
- City in Dakota County, Minnesota, United States
- Population
- 458 2024 est.
- Land area
- 1.0 sq mi
- Density
- 481 per sq mi
- Coordinates
- 44.5261° N, 93.0199° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Mississippi River → Gulf of America
- ZIP codes 1
- 55065
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Cannon Falls Township1,060 ft
- New Trier990 ft
- Hampton990 ft
- Hampton Township970 ft
- Castle Rock Township940 ft
- Waterford Township930 ft
- Sciota Township910 ft
- Stanton Township890 ft
- Randolph890 ft
- Randolph Township870 ft
- Cannon Falls850 ft
Rankings by typical elevation
- Towns in Minnesota2,527th highest of 2,692
- Towns in Dakota County23rd highest of 33
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.