Empire, MI Elevation & Topographic Map

Elevation
970 ft 295 m870 ft 265 m820 ft 250 m720 ft 220 m630 ft 190 m580 ft 175 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Empire sits at about 620 ft (190 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
620 ft 190 m
most residents: 600–650 ft
Lowest
580 ft 175 m
on the northwest side
Highest
970 ft 295 m
on the southeast side
Average
640 ft 195 m
all land inside village limits
Empire spans about 390 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 620 ft190 m |
| Highest point Inside village limits, on the southeast side | 970 ft295 m |
| Lowest point Inside village limits, on the northwest side | 580 ft175 m |
| Town center USGS map point for Empire | 620 ft190 m |
| Average of all land | 640 ft195 m |
Elevation profile, south to north
1.2 mi south to north through the town center.
Topographic Map
- Location
- Village in Leelanau County, Michigan, United States
- Population
- 356 2024 est.
- Land area
- 1.0 sq mi + 0.1 sq mi water
- Density
- 346 per sq mi
- Coordinates
- 44.8111° N, 86.0601° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- ZIP codes 1
- 49630
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Kasson Township880 ft
- Almira Township850 ft
- Platte Township790 ft
- Crystal Downs Country Club780 ft
- Maple City730 ft
- Empire Township660 ft
- Empire620 ft
- Honor620 ft
- Lake Township, Benzie County600 ft
- Glen Arbor Township600 ft
- Glen Arbor590 ft
Rankings by typical elevation
- Towns in Michigan1,766th highest of 1,985
- Towns in Leelanau County16th highest of 21
Peaks and hills nearest, by height
- Varney Hill1,120 ft
- Old Baldy Dune1,120 ft
- Sleeping Bear Dunes1,090 ft
- The Sleeping Bear1,010 ft
- Prospect Hill, Leelanau County900 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.