Breedsville, MI Elevation & Topographic Map

Elevation
710 ft 215 m700 ft 215 m690 ft 210 m670 ft 205 m660 ft 200 m650 ft 200 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Breedsville sits at about 670 ft (205 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
670 ft 205 m
most residents: 660–690 ft
Lowest
650 ft 200 m
near the middle
Highest
710 ft 215 m
on the northeast side
Average
680 ft 205 m
all land inside village limits
Breedsville spans about 60 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 670 ft205 m |
| Highest point Inside village limits, on the northeast side | 710 ft215 m |
| Lowest point Inside village limits, near the middle | 650 ft200 m |
| Town center USGS map point for Breedsville | 660 ft200 m |
| Average of all land | 680 ft205 m |
Elevation profile, south to north
0.8 mi south to north through the town center.
Topographic Map
- Location
- Village in Van Buren County, Michigan, United States
- Population
- 200 2024 est.
- Land area
- 0.7 sq mi
- Density
- 308 per sq mi
- Coordinates
- 42.3464° N, 86.0731° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- ZIP codes 1
- 49027
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Bloomingdale Township760 ft
- Bloomingdale740 ft
- Lawrence Township730 ft
- Arlington Township710 ft
- Lawrence690 ft
- Columbia Township, Van Buren County680 ft
- Breedsville670 ft
- Bangor Township, Van Buren County660 ft
- Lee Township, Allegan County660 ft
- Bangor650 ft
- Geneva Township630 ft
Rankings by typical elevation
- Towns in Michigan1,494th highest of 1,985
- Towns in Van Buren County21st highest of 29
Peaks and hills nearest, by height
- Prospect Hill, Van Buren County890 ft
- Thunder Mountain, Van Buren County810 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.