Joppatowne, MD Elevation & Topographic Map

Elevation
250 ft 75 m180 ft 55 m150 ft 45 m92 ft 28 m31 ft 9 m0 ft 0 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Joppatowne sits at about 63 ft (19 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
63 ft 19 m
most residents: 9–120 ft
Lowest
0 ft 0 m
at sea level on the Gunpowder Fls
Highest
250 ft 75 m
on the north side
Average
76 ft 23 m
all land inside the CDP boundary
Joppatowne spans about 250 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 63 ft19 m |
| Highest point Inside the CDP boundary, on the north side | 250 ft75 m |
| Lowest point Where the land meets the Gunpowder Fls | 0 ft0 m |
| Airport (MTN) FAA airport elevation, the highest point of its runways, 5.3 mi southwest of the CDP boundary | 22 ft7 m |
| Average of all land | 76 ft23 m |
Elevation profile, south to north
3.8 mi south to north through the middle of Joppatowne.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Harford County, Maryland, United States
- Population
- 13,425 2020 Census
- Land area
- 6.7 sq mi + 0.7 sq mi water
- Density
- 1,995 per sq mi
- Coordinates
- 39.4166° N, 76.3522° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Atlantic Ocean
- Airport
- Martin State (MTN) 22 ft
- ZIP codes 1
- 21085
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Pleasant Hills380 ft
- Kingsville290 ft
- Bel Air South260 ft
- Perry Hall230 ft
- Honeygo200 ft
- White Marsh150 ft
- Riverside81 ft
- Edgewood81 ft
- Abingdon81 ft
- Joppatowne63 ft
- Bowleys Quarters13 ft
Rankings by typical elevation
- Towns in Maryland397th highest of 536
- Towns in Harford County15th highest of 16
Peaks and hills nearest, by height
- Sugar Hill450 ft
- Schoolhouse Hill380 ft
- Cedar Hill270 ft
- Mountain Hill220 ft
- Boothby Hill72 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −1 ft at 39.4029° N, 76.3626° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Joppatowne is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.