Beltsville, MD Elevation & Topographic Map

Elevation
320 ft 95 m260 ft 80 m230 ft 70 m170 ft 50 m110 ft 35 m80 ft 24 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Beltsville sits at about 230 ft (70 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
230 ft 70 m
most residents: 140–270 ft
Lowest
80 ft 24 m
on the south side
Highest
320 ft 95 m
on the west side
Average
170 ft 55 m
all land inside the CDP boundary
Beltsville spans about 240 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 230 ft70 m |
| Highest point Inside the CDP boundary, on the west side | 320 ft95 m |
| Lowest point Inside the CDP boundary, on the south side | 80 ft24 m |
| Town center USGS map point for Beltsville | 140 ft40 m |
| Airport (DCA) FAA airport elevation, the highest point of its runways, 13 mi southwest of the CDP boundary | 14 ft4 m |
| Average of all land | 170 ft55 m |
Elevation profile, west to east
3.3 mi west to east through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Prince George's County, Maryland, United States
- Population
- 20,133 2020 Census
- Land area
- 7.2 sq mi
- Density
- 2,794 per sq mi
- Coordinates
- 39.0348° N, 76.9075° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Potomac River → Atlantic Ocean
- Airport
- Ronald Reagan Washington Ntl (DCA) 14 ft
- ZIP codes 3
- 20705 20740 20783
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Fairland380 ft
- White Oak360 ft
- Calverton300 ft
- Hillandale280 ft
- Konterra250 ft
- Beltsville230 ft
- Adelphi180 ft
- South Laurel180 ft
- Greenbelt140 ft
- Berwyn Heights110 ft
- College Park96 ft
Rankings by typical elevation
- Towns in Maryland266th highest of 536
- Towns in Prince George's County16th highest of 83
Peaks and hills nearest, by height
- Quirauk Mountain2,140 ft
- Hunting Hill515 ft
- Lawyers Hill270 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Beltsville is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.