Waltham, ME Elevation & Topographic Map
Elevation
480 ft 145 m380 ft 115 m330 ft 100 m230 ft 70 m130 ft 40 m85 ft 26 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town boundaries (US Census).
Elevation Data
Waltham sits at about 200 ft (60 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
200 ft 60 m
most residents: 130–450 ft
Lowest
85 ft 26 m
on the southeast side
Highest
480 ft 145 m
on the north side
Average
190 ft 60 m
all land inside town boundaries
Waltham spans about 395 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 200 ft60 m |
| Highest point Inside town boundaries, on the north side | 480 ft145 m |
| Lowest point Inside town boundaries, on the southeast side | 85 ft26 m |
| Town center USGS map point for Waltham | 320 ft95 m |
| Average of all land | 190 ft60 m |
Elevation profile, south to north
8.2 mi south to north through the town center.
Topographic Map
- Location
- Town in Hancock County, Maine, United States
- Population
- 343 2024 est.
- Land area
- 29.7 sq mi + 3.2 sq mi water
- Density
- 12 per sq mi
- Coordinates
- 44.7092° N, 68.3384° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- New England
- Drains to
- Atlantic Ocean
- ZIP codes 2
- 04605 04634
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
Rankings by typical elevation
- Towns in Maine327th highest of 506
- Towns in Hancock County9th highest of 38
Peaks and hills nearest, by height
- Cadillac Mountain1,518 ft
- Lead Mountain1,479 ft
- Mount Megunticook1,370 ft
- Cave Hill, Hancock County360 ft
- Beech Hill, Hancock County280 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town boundaries (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.