Mount Pleasant Township, KS Elevation & Topographic Map
Elevation
960 ft 290 m920 ft 280 m900 ft 275 m860 ft 265 m820 ft 250 m810 ft 245 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Mount Pleasant Township sits at about 910 ft (280 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
910 ft 280 m
most residents: 900–920 ft
Lowest
810 ft 245 m
on the west side
Highest
960 ft 290 m
on the south side
Average
890 ft 270 m
all land inside township boundaries
Mount Pleasant Township spans about 150 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 910 ft280 m |
| Highest point Inside township boundaries, on the south side | 960 ft290 m |
| Lowest point Inside township boundaries, on the west side | 810 ft245 m |
| Average of all land | 890 ft270 m |
Elevation profile, west to east
6.0 mi west to east through the middle of Mount Pleasant Township.
Topographic Map
- Location
- Township in Labette County, Kansas, United States
- Population
- 1,267 2024 est.
- Land area
- 36.0 sq mi + 0.3 sq mi water
- Density
- 35 per sq mi
- Coordinates
- 37.1890° N, 95.2977° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Neosho River → Arkansas River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Edna980 ft
- Elm Grove Township970 ft
- Altamont910 ft
- Mount Pleasant Township910 ft
- Liberty Township, Labette County880 ft
- Hackberry Township880 ft
- Oswego Township870 ft
- Fairview Township, Labette County870 ft
- Labette870 ft
- Mound Valley820 ft
- Mound Valley Township820 ft
Rankings by typical elevation
- Towns in Kansas1,848th highest of 1,996
- Towns in Labette County6th highest of 22
Peaks and hills nearest, by height
- Bender Mounds1,030 ft
- Twin Mounds, Labette County1,000 ft
- Tackett Mound990 ft
- Dixon Mound940 ft
- Timber Hill880 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 810 ft at 37.1943° N, 95.3760° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones; NOAA NGS survey heights. All public domain.