Meade County, KS Elevation & Topographic Map

Elevation
2,830 ft 865 m2,650 ft 805 m2,550 ft 780 m2,370 ft 720 m2,180 ft 665 m2,090 ft 635 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Meade County averages about 2,530 ft (770 m) above sea level across all its land. Its ground runs from 2,090 ft on the southeast side to 2,830 ft on the northwest side.
Average elevation
2,530 ft 770 m
all land inside the county
Highest
2,830 ft 865 m
on the northwest side
Lowest
2,090 ft 635 m
on the southeast side
Meade County spans about 740 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 2,530 ft770 m |
| Highest point Inside the county, on the northwest side | 2,830 ft865 m |
| Lowest point Inside the county, on the southeast side | 2,090 ft635 m |
Elevation profile, west to east
30 mi west to east through Meade Center Township.
Topographic Map
- Location
- County in Kansas, United States
- Population
- 3,892 2024 est.
- Land area
- 978.1 sq mi + 1.3 sq mi water
- Density
- 4.0 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Great Plains
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Haskell County2,920 ft
- Seward County2,810 ft
- Gray County2,740 ft
- Beaver County, OK2,570 ft
- Meade County2,530 ft
- Ford County2,490 ft
- Clark County2,160 ft
Rankings by average elevation
- Counties in Kansas23rd highest of 104
- Counties in the United States479th highest of 3,151
Peaks and hills highest inside
- Twin Hills2,740 ft
- Table Mesa2,650 ft
All 9 towns in Meade County by typical elevation
- Plains2,760 ft
- Mertilla Township2,760 ft
- West Plains Township2,760 ft
- Cimarron Township, Meade County2,660 ft
- Crooked Creek Township2,590 ft
- Meade2,490 ft
- Meade Center Township2,490 ft
- Fowler2,480 ft
- Sand Creek Township2,290 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.