Lone Elm, KS Elevation & Topographic Map
Elevation
1,120 ft 340 m1,110 ft 340 m1,110 ft 340 m1,100 ft 335 m1,090 ft 335 m1,090 ft 330 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Lone Elm sits at about 1,100 ft (335 m) above sea level, the median height of all land inside city limits (too few residents to weight by).
Typical elevation (all land)
1,100 ft 335 m
few residents
Lowest
1,090 ft 330 m
on the southeast side
Highest
1,110 ft 340 m
on the northeast side
Average
1,100 ft 335 m
all land inside city limits
Lone Elm is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 1,100 ft335 m |
| Highest point Inside city limits, on the northeast side | 1,110 ft340 m |
| Lowest point Inside city limits, on the southeast side | 1,090 ft330 m |
| Town center USGS map point for Lone Elm | 1,100 ft335 m |
| Average of all land | 1,100 ft335 m |
Topographic Map
- Location
- City in Anderson County, Kansas, United States
- Population
- 22 2024 est.
- Land area
- 0.1 sq mi
- Density
- 324 per sq mi
- Coordinates
- 38.0800° N, 95.2433° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Neosho River → Arkansas River → Mississippi River → Gulf of America
- ZIP codes 1
- 66039
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Colony1,120 ft
- Ozark Township1,120 ft
- Lone Elm Township1,120 ft
- Welda1,100 ft
- Welda Township1,100 ft
- Lone Elm1,100 ft
- Mildred1,060 ft
- Osage Township, Allen County1,050 ft
- Rich Township1,050 ft
- Kincaid1,050 ft
- Deer Creek Township1,050 ft
Rankings by typical elevation
- Towns in Kansas1,512th highest of 1,996
- Towns in Anderson County6th highest of 22
How we measure
- Typical elevation: the median height of all land inside the city limits; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.