Elmdale, KS Elevation & Topographic Map

Elevation
1,220 ft 370 m1,210 ft 370 m1,210 ft 370 m1,200 ft 365 m1,190 ft 365 m1,190 ft 360 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Elmdale sits at about 1,200 ft (365 m) above sea level, the median height of all land inside city limits (too few residents to weight by).
Typical elevation (all land)
1,200 ft 365 m
few residents
Lowest
1,190 ft 360 m
on the northeast side
Highest
1,200 ft 365 m
on the west side
Average
1,200 ft 365 m
all land inside city limits
Elmdale is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 1,200 ft365 m |
| Highest point Inside city limits, on the west side | 1,200 ft365 m |
| Lowest point Inside city limits, on the northeast side | 1,190 ft360 m |
| Town center USGS map point for Elmdale | 1,200 ft365 m |
| Average of all land | 1,200 ft365 m |
Topographic Map
- Location
- City in Chase County, Kansas, United States
- Population
- 40 2024 est.
- Land area
- 0.2 sq mi
- Density
- 242 per sq mi
- Coordinates
- 38.3736° N, 96.6447° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Cottonwood River → Neosho River → Arkansas River → Mississippi River → Gulf of America
- ZIP codes 1
- 66850
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Homestead Township1,450 ft
- Grant Township, Marion County1,430 ft
- Diamond Creek Township1,290 ft
- Cottonwood Township1,280 ft
- Bazaar Township1,260 ft
- Cedar Point1,250 ft
- Falls Township1,210 ft
- Strong Township1,210 ft
- Cottonwood Falls1,210 ft
- Strong City1,210 ft
- Elmdale1,200 ft
Rankings by typical elevation
- Towns in Kansas1,365th highest of 1,996
- Towns in Chase Countylowest of 14
How we measure
- Typical elevation: the median height of all land inside the city limits; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.