Mitchell County, IA Elevation & Topographic Map
Elevation
1,410 ft 430 m1,310 ft 400 m1,260 ft 385 m1,170 ft 355 m1,070 ft 325 m1,030 ft 315 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Mitchell County averages about 1,190 ft (365 m) above sea level across all its land. Its ground runs from 1,030 ft on the south side to 1,410 ft on the northeast side.
Average elevation
1,190 ft 365 m
all land inside the county
Highest
1,410 ft 430 m
on the northeast side
Lowest
1,030 ft 315 m
on the south side
Mitchell County spans about 380 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,190 ft365 m |
| Highest point Inside the county, on the northeast side | 1,410 ft430 m |
| Lowest point Inside the county, on the south side | 1,030 ft315 m |
Elevation profile, south to north
20 mi south to north through Osage.
Topographic Map
- Location
- County in Iowa, United States
- Population
- 10,632 2024 est.
- Land area
- 469.3 sq mi + 0.4 sq mi water
- Density
- 23 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Mower County, MN1,300 ft
- Howard County1,250 ft
- Worth County1,220 ft
- Mitchell County1,190 ft
- Cerro Gordo County1,170 ft
- Floyd County1,070 ft
Rankings by average elevation
- Counties in Iowa29th highest of 99
- Counties in the United States1,123rd highest of 3,151
All 14 towns in Mitchell County by typical elevation
- McIntire1,270 ft
- Meyer1,260 ft
- Riceville1,220 ft
- Stacyville1,200 ft
- Toeterville1,190 ft
- Mitchell1,190 ft
- Carpenter1,190 ft
- Mona1,170 ft
- Little Cedar1,170 ft
- Osage1,170 ft
- Otranto1,170 ft
- St. Ansgar1,160 ft
- New Haven1,110 ft
- Orchard1,090 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.