Elkport, IA Elevation & Topographic Map
Elevation
800 ft 245 m760 ft 230 m740 ft 225 m700 ft 215 m660 ft 205 m650 ft 195 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Elkport sits at about 660 ft (200 m) above sea level, the median height of all land inside city limits (too few residents to weight by).
Typical elevation (all land)
660 ft 200 m
few residents
Lowest
650 ft 195 m
on the east side
Highest
800 ft 245 m
on the north side
Average
680 ft 205 m
all land inside city limits
Elkport spans about 150 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 660 ft200 m |
| Highest point Inside city limits, on the north side | 800 ft245 m |
| Lowest point Inside city limits, on the east side | 650 ft195 m |
| Town center USGS map point for Elkport | 660 ft200 m |
| Average of all land | 680 ft205 m |
Elevation profile, south to north
0.4 mi south to north through the town center.
Topographic Map
- Location
- City in Clayton County, Iowa, United States
- Population
- 29 2024 est.
- Land area
- 0.2 sq mi
- Density
- 116 per sq mi
- Coordinates
- 42.7397° N, 91.2779° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Mississippi River → Gulf of America
- ZIP codes 1
- 52044
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Edgewood1,160 ft
- Colesburg1,150 ft
- Greeley1,140 ft
- Garnavillo1,050 ft
- Glen Haven, Grant County, WI980 ft
- Glen Haven, WI980 ft
- Elkader770 ft
- Garber710 ft
- Elkport660 ft
- Osterdock640 ft
- Guttenberg630 ft
Rankings by typical elevation
- Towns in Iowa982nd highest of 1,026
- Towns in Clayton County14th highest of 16
Peaks and hills nearest, by height
- Chicken Ridge1,180 ft
- Pilot Knob, Clayton County1,080 ft
How we measure
- Typical elevation: the median height of all land inside the city limits; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.