Conesville, IA Elevation & Topographic Map

Topographic elevation map of Conesville, Iowa, shaded from 610 ft on the south side to 620 ft on the northeast side
Elevation
640 ft 195 m630 ft 195 m630 ft 190 m620 ft 190 m610 ft 185 m610 ft 185 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
City area
Fades everything outside the official city limits (US Census).

Elevation Data

Conesville sits at about 610 ft (185 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
610 ft 185 m
nearly all residents at this height
Lowest
610 ft 185 m
on the south side
Highest
620 ft 190 m
on the northeast side
Average
610 ft 185 m
all land inside city limits

Conesville is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.

FigureElevation
Typical
Where people live: half of residents higher, half lower
610 ft185 m
Highest point
Inside city limits, on the northeast side
620 ft190 m
Lowest point
Inside city limits, on the south side
610 ft185 m
Town center
USGS map point for Conesville
610 ft185 m
Average of all land610 ft185 m

Topographic Map

Topographic elevation map of Conesville, Iowa, shaded from 610 ft on the south side to 620 ft on the northeast side
City limits (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
City in Muscatine County, Iowa, United States
Population
350 2024 est.
Land area
0.4 sq mi
Density
975 per sq mi
Coordinates
41.3820° N, 91.3499° W
Time zone
Central UTC−6 / −5
Landform region
Central Lowland
Drains to
Iowa River → Mississippi River → Gulf of America
ZIP codes 1
52739
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

  1. Ainsworth720 ft
  2. Columbus City720 ft
  3. Lone Tree720 ft
  4. Cotter710 ft
  5. Grandview700 ft
  6. Columbus Junction680 ft
  7. Letts670 ft
  8. Nichols630 ft
  9. Conesville610 ft
  10. Fredonia600 ft
  11. Fruitland550 ft

Rankings by typical elevation

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 610 ft at 41.3785° N, 91.3490° W, is in such a hollow or patch and is not counted.
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.