Beaver, IA Elevation & Topographic Map

Elevation
1,040 ft 315 m1,030 ft 315 m1,030 ft 315 m1,020 ft 310 m1,010 ft 310 m1,010 ft 305 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Beaver sits at about 1,020 ft (310 m) above sea level, the median height of all land inside city limits (too few residents to weight by).
Typical elevation (all land)
1,020 ft 310 m
few residents
Lowest
1,010 ft 305 m
on the northwest side
Highest
1,030 ft 315 m
on the northeast side
Average
1,020 ft 310 m
all land inside city limits
Beaver is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 1,020 ft310 m |
| Highest point Inside city limits, on the northeast side | 1,030 ft315 m |
| Lowest point Inside city limits, on the northwest side | 1,010 ft305 m |
| Town center USGS map point for Beaver | 1,020 ft310 m |
| Average of all land | 1,020 ft310 m |
Topographic Map
- Location
- City in Boone County, Iowa, United States
- Population
- 46 2024 est.
- Land area
- 0.2 sq mi
- Density
- 184 per sq mi
- Coordinates
- 42.0383° N, 94.1422° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Beaver Creek → Des Moines River → Mississippi River → Gulf of America
- ZIP codes 1
- 50031
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Boxholm1,140 ft
- Dana1,120 ft
- Pilot Mound1,110 ft
- Paton1,100 ft
- Ogden1,090 ft
- Rippey1,070 ft
- Jefferson1,060 ft
- Grand Junction1,030 ft
- Beaver1,020 ft
- Berkley990 ft
- Fraser970 ft
Rankings by typical elevation
- Towns in Iowa561st highest of 1,026
- Towns in Boone County6th highest of 9
How we measure
- Typical elevation: the median height of all land inside the city limits; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.