Wayne Township, Fulton County, IN Elevation & Topographic Map
Elevation
810 ft 245 m790 ft 240 m780 ft 235 m760 ft 230 m740 ft 225 m730 ft 220 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Wayne Township, Fulton County sits at about 770 ft (235 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
770 ft 235 m
most residents: 750–790 ft
Lowest
730 ft 220 m
on the west side
Highest
810 ft 245 m
on the southeast side
Average
760 ft 235 m
all land inside township boundaries
Wayne Township, Fulton County spans about 80 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 770 ft235 m |
| Highest point Inside township boundaries, on the southeast side | 810 ft245 m |
| Lowest point Inside township boundaries, on the west side | 730 ft220 m |
| Average of all land | 760 ft235 m |
Elevation profile, west to east
7.8 mi west to east through the middle of Wayne Township, Fulton County.
Topographic Map
- Location
- Township in Fulton County, Indiana, United States
- Population
- 527 2024 est.
- Land area
- 46.7 sq mi + 0.1 sq mi water
- Density
- 11 per sq mi
- Coordinates
- 40.9533° N, 86.3945° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Tippecanoe River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Lucerne800 ft
- Liberty Township, Fulton County800 ft
- Fulton790 ft
- Kewanna780 ft
- Bethlehem Township780 ft
- Harrison Township, Cass County770 ft
- Union Township, Fulton County770 ft
- Wayne Township, Fulton County770 ft
- Royal Center730 ft
- Boone Township, Cass County730 ft
- Van Buren Township, Pulaski County720 ft
Rankings by typical elevation
- Towns in Indiana951st highest of 1,977
- Towns in Fulton County12th highest of 16
Peaks and hills nearest, by height
- Morgan Hill820 ft
- Bunker Hill, Pulaski County760 ft
- Pigeon Roost Hill740 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 730 ft at 40.9349° N, 86.4671° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.