Talma, IN Elevation & Topographic Map

Elevation
790 ft 240 m780 ft 240 m780 ft 235 m770 ft 235 m760 ft 230 m760 ft 230 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Talma sits at about 770 ft (235 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).
Typical elevation (all land)
770 ft 235 m
few residents
Lowest
760 ft 230 m
on the west side
Highest
780 ft 235 m
on the northeast side
Average
770 ft 235 m
all land inside the CDP boundary
Talma is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 770 ft235 m |
| Highest point Inside the CDP boundary, on the northeast side | 780 ft235 m |
| Lowest point Inside the CDP boundary, on the west side | 760 ft230 m |
| Town center USGS map point for Talma | 770 ft235 m |
| Airport (RCR) FAA airport elevation, the highest point of its runways, 6.1 mi south of the CDP boundary | 790 ft241 m |
| Average of all land | 770 ft235 m |
Topographic Map
- Location
- Unincorporated community (census-designated place) in Fulton County, Indiana, United States
- Population
- 31 2020 Census
- Land area
- 0.2 sq mi
- Density
- 153 per sq mi
- Coordinates
- 41.1539° N, 86.1350° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Tippecanoe River → Wabash River → Ohio River → Mississippi River → Gulf of America
- Airport
- Fulton County (RCR) 790 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Franklin Township, Kosciusko County860 ft
- Mentone830 ft
- Walnut Township820 ft
- Argos820 ft
- Richland Township, Fulton County810 ft
- Tippecanoe Township, Marshall County780 ft
- Rochester780 ft
- Rochester Township780 ft
- Newcastle Township780 ft
- Tippecanoe780 ft
- Talma770 ft
Rankings by typical elevation
- Towns in Indiana952nd highest of 1,977
- Towns in Fulton County13th highest of 16
Peaks and hills nearest, by height
- McElroy Hill (historical)890 ft
How we measure
- Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Talma is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); FAA airport data; BTS time zones. All public domain.