Salem Township, IN Elevation & Topographic Map

Elevation

1,000 ft 305 m970 ft 295 m950 ft 290 m910 ft 280 m880 ft 265 m860 ft 260 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Township area: Fades everything outside the official township boundaries (US Census).

Elevation Data

Salem Township sits at about 920 ft (280 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

920 ft 280 m

most residents: 900–960 ft

Lowest

860 ft 260 m

on the west side

Highest

1,000 ft 305 m

on the southeast side

Average

940 ft 290 m

all land inside township boundaries

Salem Township spans about 140 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	920 ft280 m
Highest point Inside township boundaries, on the southeast side	1,000 ft305 m
Lowest point Inside township boundaries, on the west side	860 ft260 m
Airport (AID) FAA airport elevation, the highest point of its runways, 2.0 mi west of the township boundaries	919 ft280 m
Average of all land	940 ft290 m

Elevation profile, west to east

7.0 mi west to east through the middle of Salem Township.

Topographic Map

Location: Township in Delaware County, Indiana, United States
Population: 4,069 2024 est.
Land area: 35.1 sq mi + 0.2 sq mi water
Density: 116 per sq mi
Coordinates: 40.1187° N, 85.5246° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: White River → Wabash River → Ohio River → Mississippi River → Gulf of America
Airport: Anderson Regional (AID) 919 ft

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana279th highest of 1,977
Towns in Delaware County15th highest of 21

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); FAA airport data; BTS time zones. All public domain.