Ross Township, Clinton County, IN Elevation & Topographic Map

Topographic elevation map of Ross Township, Clinton County, Indiana, shaded from 630 ft on the west side to 830 ft on the southeast side
Elevation
830 ft 255 m780 ft 235 m750 ft 230 m700 ft 215 m650 ft 200 m630 ft 190 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Township area
Fades everything outside the official township boundaries (US Census).

Elevation Data

Ross Township, Clinton County sits at about 720 ft (220 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
720 ft 220 m
most residents: 700–770 ft
Lowest
630 ft 190 m
on the west side
Highest
830 ft 255 m
on the southeast side
Average
740 ft 225 m
all land inside township boundaries

Ross Township, Clinton County spans about 200 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
720 ft220 m
Highest point
Inside township boundaries, on the southeast side
830 ft255 m
Lowest point
Inside township boundaries, on the west side
630 ft190 m
Average of all land740 ft225 m

Elevation profile, west to east

6.9 mi west to east through the middle of Ross Township, Clinton County.

Topographic Map

Topographic elevation map of Ross Township, Clinton County, Indiana, shaded from 630 ft on the west side to 830 ft on the southeast side
Township boundaries (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Township in Clinton County, Indiana, United States
Population
2,816 2024 est.
Land area
29.6 sq mi
Density
95 per sq mi
Coordinates
40.4089° N, 86.6065° W
Time zone
Eastern UTC−5 / −4
Landform region
Central Lowland
Drains to
Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.